Keeping your cabinets looking good requires a bit of updating. If yours look a little drab, there are several ways to update them. You can paint them, reface them, or add under-cabinet lighting. You can also install new knobs and drawer pulls.
Reface your cabinets
Having your cabinets refaced can be a great way to update your kitchen. It doesn’t require the demolition of your home, and it’s also less expensive than replacing the entire cabinet. You can also reface your cabinets as part of a larger renovation project.
The cost of refacing depends on your region, the number of cabinets you have, and the quality of the materials. The average homeowner spends around $5,871 to $12,980 on this project. However, the cost varies greatly by zip code.
Some refacing projects include adding accessories, such as glass inserts, wine racks, and hidden trash cans. These accessories can add up to $100 to $400 per unit.
Other refacing projects may leave the selection of hardware to the homeowner. These projects may take more time.
Paint them
Getting a new coat of paint on your cabinets from a Custom cabinet manufacturer services can give your kitchen a fresh, updated look without much effort. But before you start, you must ensure that your cabinet is ready to get painted.
Ideally, sand the surface of your cabinet before you paint it. It would help if you sanded the cabinet to create a smooth surface for the paint to adhere to. But be careful not to sand the inside of the cabinet. If you sand the cabinet’s interior, you will affect the door’s function.
You can choose from several different paints to use on your cabinet. The most common type of paint today is latex paint. But be sure to choose a paint that suits your kitchen’s environment. You also want to choose a paint that is resistant to scratching.
Add under-cabinet lights
Adding under-cabinet lights is a great way to add warmth and color to your home. There are several types of light to choose from, including LED and fluorescent lighting. Each type has its benefits and drawbacks. You should also consider your budget.
You can choose between hardwired and plug-in fixtures. A hardwired fixture is better for a kitchen because it saves you from overloading your circuits. It would help if you were also sure you have a code-compliant power source.
You will need to hire a professional electrician if you choose hardwired fixtures. You should also ensure your electrical panel is tested for working under cabinet lights.
If you need clarification on the process, you can get some assistance from a local home improvement store. You can also ask a contractor for advice.
Replace the knobs and drawer pulls
Changing the knobs and drawer pulls on cabinets can be a great way to upgrade your kitchen. They provide a practical function and add beauty to your cabinets. They are also simple to install. You can find many designs and finishes to choose from. You can either do the job yourself or hire a handyperson.
Before you start, you will need to measure and mark the holes for your new cabinet hardware. You can use a template to help you. You can get one at your local home improvement store or make your own. The key is to get the measurements right. If you do, the design of your cabinets may look correct.
After you have the correct measurements, you will need to drill the holes for your new cabinet hardware. You will need a jig to keep the hardware in the correct position.
Remove the upper cabinet doors
Removing the upper cabinet doors can be an effective way to re-vamp your kitchen. Doing so can create a cleaner, more spacious look and add color to your cabinet interiors with glass inserts. It’s also cost-effective to add an open shelving effect to your kitchen.
The process involves using a crowbar to loosen the hinges. Next, you’ll need to remove the screws on the bottom of the hinges. You’ll want to label the plastic bag that contains the screws so that you don’t mix them up later.
Using caulk to reduce damage when dismantling your cabinets is also a good idea. If you still need to do so, then take the time to label your cabinets and cupboards so that they are easier to find when you are ready to re-install.
